MK-5000 Series Core Saws
Heavy duty 14" core cutting saw with a 5 hp, 230 volt electric motor or a 9 hp Honda engine. Foot pedal for hands-free cutting, open back saw frame with large conveyor cart for cutting longer cores and heavy duty blade shaft bearings.
MK-5000 Series Features:
- Precision screw feed mechanism allows the cutting head to be easily raised or lowered to the precise cutting depth required
- Self-leveling blade guard provides optimum blade coverage for operator safety
- Open-back design allows for material up to 20" long to be cut
- Conveyor cart built from heavy-duty cast aluminum
- 3 phase saws are equipped with GE NEMA 1 starters in NEMA 12 enclosure
- Adjustable water supply for maximum blade protection
- Built-in tie-downs for safer saw transport
- Ergonomically designed handle for reduced operator fatigue
- Heavy-duty built-in forklift brackets allow lift to approach from the front or either side of the saw
- One-year limited warranty
- Made in the USA
| Model | MK-5005S | MK-5009G |
| Part # | 169751 | 169757 |
| Motor/Engine | 5 hp | Honda GX270 |
| Voltage | 208/230V | • |
| Motor RPM | 1,725 | 3,600 |
| Blade RPM | 2,700 | 2,700 |
| Blade Capacity | 14" (350mm) | 14" (350mm) |
| Depth of Cut | 5" | 5" |
| Arbor | 1" (25mm) | 1" (25mm) |
| Length of Cut | 20" | 20" |
| Weight | 445 lbs. | 498 lbs. |
| LxWxH | 53" x 26" x 63" | 57" x 26" x 72" |
| LxWxH (mm) | 1,346 x 660 x 1,600 | 1,524 x 660 x 1,826 |
| Included Accessories | ||
| Core Sample Holder | ||
| 14" 62Q Wet Cutting Diamond Blade | ||
| Rip Guide | ||
| Water Pump | ||
Warning: This product can expose you to chemicals including nickel and crystalline silica, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov